DJZG Factory wholesale Maybach special car clock For Mercedes Benz V-class Vito W447 V260

Product description

In the car, it is mainly used to switch the interface of the central control display to the clock interface. As long as the button is pressed when the car is powered on, the central control display will automatically switch to the clock interface, which is very convenient and quick. At the same time, this button can also be used to set the time of the car.
In addition, some high-configuration cars also have a system clock button and a bus clock button, which refer to the multimedia system time and the CAN network time of the car itself.
How to adjust the time of the car?
1. Turn the ignition switch of the car to the ACC gear, and power on the car without starting the engine.
2. Press and hold the clock button for about 5 seconds to see if the interface of the central control display is switched to the time adjustment interface.
3. You can see that there are two buttons at the bottom of the instrument panel. The button on the left has a time symbol, and the button on the right is 0.0/set. First press the time button on the left, which can be used to switch and adjust the hours and minutes.

4. When the time on the central control display is flashing, press the set button on the right to add or subtract the time. Press and hold the button to make the time number jump quickly, and wait until it is adjusted to a certain number to stop.
5. After the time is adjusted, press and hold the clock button to confirm and it is completed.
In addition, when adjusting the time, adjust it quickly, and don't leave it for a long time. If the interval is relatively long, the interface will automatically jump, and at this time it is necessary to start setting the time again. Therefore, when adjusting the time, it is best to adjust the hour first, and then adjust the minutes, so that you don't have to worry about the interface jumping. Also, there is no way to adjust the time while driving, so it is best to find a safe place to stop and adjust.