New design comfortable Ergonomic compliance Support Extension Mat Leg Padel Extended Knee Pad For Honda Elysion

Product description

Main function: The leg support is also derived from the car seat. It is mainly used to assist in increasing the passenger's leg support area, filling the entire leg bend, soft, elastic and comfortable, so as to improve the comfort of the ride. 2. Secondary function: Seat leg support adjustment can adjust the angle to support the calf, which is divided into leg support adjustment of front seats and rear seats. Leg rest adjustment was first born on luxury cars, providing a stretched sitting posture for the boss in the rear, and later developed accordingly in MPV models.

installation method
1. Cover the adapter plate with coating material (skip this step without coating material), and dig out the corresponding holes. 2. Remove the leg rest panel, and cover the leg rest panel with the coating material. After digging out the corresponding hole, Assemble the back panel of the leg rest (skip this step if there is no covering material) 3. Remove the plastic guard plate under the original co-pilot 4. Install the holes 1 and 2 of the adapter plate to the reserved holes under the co-pilot 5. According to the Mark the position of hole 3 on the iron plate of the passenger seat iron plate. 6. Remove the adapter plate, and then use a pistol drill to drill a hole at the marked position on the iron plate of the passenger seat. 7. Install a 6mm bolt at the opening of the passenger seat. It should be noted that the nuts are on the outside, fasten them firmly 8. Install 8mm bolts at holes 4, 5, 6, and 7 of the adapter plate. It should be noted that the nuts are on the outside, and tighten them firmly. 2. Stick the 6mm nuts on the back with transparent glue. 10. Install the adapter plate with the front facing outward. It should be noted that the bolts in hole 1 and hole 2 are outside, and the nuts are inside. Tighten them firmly. 11. Install the leg support to the hole of the adapter plate Fasten the bolts with holes 4, 5, 6 and 7, and the installation is complete.